The ATP Lighting's Villa family has already got the certificates N, ENEC and CB granted by AENOR

The series of classics adds to the Siglo, Plaza, Malaki and Enur, and validates its IP66, IK10 and Class II categories in an international scope

PAMPLONA 19/06/2017— Another ATP Lighting's family of luminaires already enjoys the certificates N, ENEC and CB granted by AENOR, both in their versions of discharge as in LED. This time, as ATP recently advanced, it is series of squared classics Villa and Villa Royal, which adds to the circular classics Siglo, Plaza and Malaki, and to the road and suburban luminaire family Enur.

 

As in previous cases, the Villa has had to pass the tests required by AENOR in the Official Central Laboratory of Electrical Engineering (LCOE), which guarantees –among other parameters of electromagnetic compatibility, performance and technical safety– the IP66, IK10 and Class II of the aforementioned luminaires. These certificates also cover different and complementary territorial domains: national (N), European (ENEC) and global (CB, valid in more than 50 countries in the rest of the world).

 

Thanks to these distinctions, ATP can accredit, at an international level and through an independent and prestigious organization such as AENOR, three of the unique and defining characteristics of its products, such as total sealing, maximum resistance to vandalism and absolute protection against electrocution.

 

Above the norm: IP66+, IK10+ and Class II+

 

As is common to all ATP products, the Villa family does not conform to comply with the standard, but goes beyond and exceeds widely the demanding requirements set to obtain N, ENEC and CB certificates. In this way, the Villa has the following characteristics:

 

IP66+: The Villa's total sealing –IP66– is not limited to the optical block, but includes the entire enclosure of the luminaire. The equipment and other electrical and electronic elements of the street light are thus completely protected against the possible penetration of liquids and solid particles.

 

IK10+These luminaires withstand impact tests greater than 50 joules, which is more than twice the maximum set by the IK standard –IK10, 20 joules–.

 

Class II+: The Villa is well above Class II, as it has a dielectric resistance –the voltage intensity necessary for an insulating body to start conducting electricity– of 175 000 volts, which is 60 times higher than what is required by the standard to achieve this category.

 

These unique capabilities ensure the durability and safety of this squared classics family even under the most extreme conditions.

 

Laminar® Heatsink and Confort® Diffuser in Villa LED

 

The LED versions of the Villa family come standard with the revolutionary Laminar Heatsink®, a system designed and patented by ATP to solve the overheating of LED modules and prolong their lifespan. This device lowers the operating temperature of the LED by 21 % and extends its life by more than 21 000 hours.

 

Villa LED can also be supplied with the Comfort Diffuser®, specially devised to mitigate the dazzling of pedestrians -one of the main drawbacks of this light source- but without sacrificing any of the exceptional performance and efficiency of the diodes technology.

Press contact:

Julio Aparicio

ATP Lighting

comunicacion@atpiluminacion.com

(+34) 948 33 07 12

Copyright © 2016 ATP Lighting Inc. All rights reserved. ATP Lighting, the ATP Lighting logo and all trade names listed on this website with the ® symbol are registered trademarks of ATP Lighting.

More news

Images download

  • The Villa and Villa Royal series have already got the N, ENEC and CB certificates, for both discharge and LED versions. The Villa and Villa Royal series have already got the N, ENEC and CB certificates, for both discharge and LED versions. (Download Zip)
  • The Villa family: classic style public lighting with extraordinary features. The Villa family: classic style public lighting with extraordinary features. (Download Zip)
  • Disipador Laminar® y Difusor Confort® en el Villa LED Disipador Laminar® y Difusor Confort® en el Villa LED (Download Zip)
  • The emblems of the distinctions, valid in Spain (N), Europe (ENEC) and more than 50 countries in the rest of the world (ENEC). The emblems of the distinctions, valid in Spain (N), Europe (ENEC) and more than 50 countries in the rest of the world (ENEC). (Download Zip)
ATP polymeric materials

ATP polymeric materials

Specially designed to satisfy the highest demands of resistance to external agents and to vandalism in public lighting and urban furniture.

Immune to corrosion

Immune to corrosion

Our lighting and outside furniture products are completely rust-proof since they are made out of raw materials which are invulnerable to corrosion.

Anti-electrocution products

Anti-electrocution products

Our products are completely safe since they are made with insulating materials which do not conduct electricity and prevent any danger of electrocution when making contact with the column or the luminaire.

IK10+: Beyond anti-vandalism

IK10+: Beyond anti-vandalism

Anti-vandal street lighting and urban furniture capable of withstanding and passing impact tests beyond 50 joules, which is more than twice the standard of IK Rating EN 50102.

IP66+: Totally hermetic

IP66+: Totally hermetic

Several devices ensure the sealing of the luminaire in any situation.

This high IP rate offers whole protection to all the internal elements of the street light.

100 % recyclable

100 % recyclable

Products made with 100 % recyclable, sustainable and ecologic materials.

Get to know the most ecological street lighting of the world.

10-year warranty

10-year warranty

The highest warranty in the sector.

 

Since 1969.

 

Effectiveness tested in tropical environments.

[...]
Loading...
[...]
Loading...